Factory

Where the frames are actually made

Steel cutting, robotic welding, powder coating, upholstery and final assembly under one roof — with inspection at every stage, not just before loading.

Production

Built to survive a commercial floor

✓
Tube spec — 2.5–3.0 mm wall, 50×100 mm and 60×120 mm main frames.
✓
Welding — jig-based MIG welding, full seam inspection and re-work station.
✓
Coating — 7-step pre-treatment, 80 μm powder coat, impact and salt-spray checked.
✓
Assembly — every unit built up, cables tensioned and stack tested before packing.
✓
Packing — 5-layer corrugated, foam corners, stretch wrap, steel strapping.

Quality control

Four inspection gates

Each gate produces a photo report that we send with the shipment documents.

01 Incoming

Steel thickness gauge, tube dimension and hardware batch check.

02 In-line

Weld and dimension check at 30% and 70% of the run.

03 Pre-assembly

Full build-up, cable travel, stack alignment, pad fit.

04 Pre-shipment

Random unboxing, drop test on cartons, loading photo set.

Logistics

Loading plans that save freight

Mixing categories in one container is where the real saving is. We build the plan before you pay.

20GP mixed load

Typical: 12–16 strength machines, or 8 machines plus 40 benches and storage racks.

40HQ mixed load

Typical: 25–30 machines, or a full gym floor including racks and free-weight storage.

Documents

Packing list, commercial invoice, B/L, CO — sent within 48 hours of ETD.

Since 2011Strength equipment manufacturing

54 modelsCommercial & home gym range

OEM / ODMCustom frames, colors, logos

20–30 daysStandard production lead time

FOB Qingdao / TianjinMixed container loading